There are many different ways which you can take when approaching a carpet and upholstery cleaning task. The reason you are cleaning (general clean, removal of stains etc) as well as the kind of fabric you are cleaning both determine the kind of method you will choose. Whether you are going to use a professional carpet cleaning service or you are planning on doing it yourself, here are some basic guidelines to follow to make sure you don't damage the material.
Carpet and rug cleaning methods
Basically there are five basic methods of cleaning carpets namely, steaming, shampooing, dry foam,quick dry, and dry absorbent compound cleaning.
Steam cleaning (a.k.a hot water extraction) is probably the most popular of all the different methods but not always the best since the drying time, depending on the material, can be as long as 12 hours. A high-powered pump sprays a cleaning fluid into the carpet which is then sucked out immediately by a strong vacuum.
There are many different types of carpet shampoo machines available on the market. Many of them stand upright with a tank for the solution and a couple of nylon brushes underneath. If you can imagine somebody manually cleaning with a scrubbing brush, this is basically the same that happens with a machine. The carpet is scoured with the nylon brushes loosening the dirt which is then vacuumed up later after the carpet has dried. This method has the same unfortunate downside in that it can take over 12 hours for the carpet to dry
Quick dry cleaning uses the same equipment as normal shampooing and actually the two methods are identical in many ways. The only different is that quick dry cleaning, instead of using nylon brushes to scrub the carpet, uses a flat, absorbent pad which looks similar to a small round mop. The carpet is first sprayed with the quick dry cleaning solution before the machine buffs the carpet (think of buffing as being the same as trying to make your kitchen floor shine). The bonnet (the pad) absorbs the cleaning fluid and collects the dirt at the same time. Drying time is about an hour which is a lot more practical for high traffic areas.
If you are looking for a method that is between steam cleaning and shampooing then dry foam cleaning is the answer. Foam is distributed over the carpet using a machine which has rolling brushes after which the carpet is sucked clean using the standard carpet vacuum cleaner. It only takes an hour or two to dry.
A dry, absorbent compound which contains various solvents and detergents are spread lightly over the carpet. Either you, or the professional carpet cleaner you hire, will use a machine which works the powder into the carpet fibers after which you need to let some time go by while the powder absorbs the dirt and smells. After a short while (depending on the brand of powder you use), vacuum the carpet so that it removes the remainder of the powder. Since no water is ever used on the carpet there is no need for any drying time.
Options for cleaning upholstery
The upholstery fabric is what normally determines what kind of cleaning method will be used. Velvets and silks, for example, can only be dry cleaned and, unless you really know what you are doing, is best left to an upholstery cleaning professional. Other more durable fabrics can be steam cleaned similar to carpets as they do not suffer any side effects from getting wet. The hot extraction method (steam cleaning) is identical to that which is used for carpets except that the nozzle is a small, hand held version. Hand shampooing can also be used but instead of using a machine the cleaning fluid is agitated into a foam and this foam is then applied to the fabric using a sponge.
Identifying Upholstery
When it comes to cleaning fabric furniture, most people don't know what the best method to use should be. Search for the manufacturer's instructions label. You should find it lurking at the bottom of one or all of the cushions and this should contain the manufactures suggestions, warnings and instructions. Apart from all the other images and text, look out for one of three codes: 'S', 'W' or 'SW'. 'W' indicates that wet cleaning is permissible while the 'S' states that the material should only be dry cleaned. 'SW' indicates that the material is suitable for both wet and dry cleaning methods.
About the Author:
Commercial office cleaning as well as exterior building cleaning, all done for you b y Crystal Clean Solutions. (www.crystalcleansolutions.co.uk)
| < Prev | Next > |
|---|
